Installing roulette system with .iso file.

Here is a link to download the .iso.
http://www.4knh.com/roulettemaster5.iso
OR
http://www.4knh.com/roulettemaster5.dd

and here is a tool to install the .iso un a usb stick(while downloading prepare an empty USB stick with at least 4GB)
http://www.4knh.com/roulettemaster5.installer.exe

Plug in a USB stick with at least 16GB of memory. The entire content will be erased during this process, so make sure you do not have any important data on the stick.

Run roulettemaster5.installer.exe. If everything went is as it should, the installer will already show your USB stick under "Device". If not, please select the right one.

Under "Create a bootable disk using", select "DD Image", and by clicking the CDROM icon select the file *.iso or *.dd. If you downloaded *.iso file, select ALL FILES in the filter selection, to show the file.

Click "Start".

Comfirm any dialog that may pop-out and wait for the USB stick to be created(15min).

Prepare a PC board with at least 4GB RAM and at least two network cards(I would suggest that you choose a AsRock IMB150) and a SSD HDD(Kingston or Samsung) with at least 30GB capacity.

This PC will become "Roulette, Master PC". Plug in the USB stick and configure CMOS/BIOS to boot from the USB stick.

It should load a live operating system from the USB stick.

When the desktop loads an installer should pop-up. Follow the steps for installation. Configure the right timezone and location.
MAKE SURE you enter username: user and password: givelogin

Also select "Erase whole HDD and Install Ubuntu", OK..

Please wait..........

Reboot computer now?, YES

When desktop loads on a system running from HDD, configure ip of the first network card to 10.5.10.254, netmask 255.255.255.0, gateway:-leave empty-

Also configure automatic login in user settings.

Now start POPE with the icon.

In POPE select "Utilities->Activate new roulette". Follow the widzard and configure everything as it should be. For activation password use the one that we provided to you. You can skip the step for ExpireCode if you do not have one ready. Apply for the code by sending an email to "enej.miklavcic@gmail.com". Pay attention when entering POPE passwords and make sure you do not loose it. You will need these passwords for connecting with POPE to this machine after the activation process is complete.

REBOOT PC.

Now you can connect terminal computers via lan cable and ethernet hub to the installed server network card 0 - eth0/enc3p.  Terminal computers have to be configured to "PXE boot from lan".

Terminals get the OS from server and the first boot they will ask for station number-a touch calibration will pop-up. You can use the touchscreen to select the 
terminal number or use the keyboard. On keyboard numbers 1-9 and 0 for terminals 1-10 and qwertzuiop for terminal 11-20. b for billboard, l for lady roulette.

Terminals will enter roulette software with the configured terminal number.