Installing roulette system with .iso file.

Here is a link to download the .iso.
http://www.4knh.com/roulettemaster4_5.iso

and here is a tool to install the .iso un a usb stick(while downloading prepare an empty USB stick with at least 4GB)
http://www.4knh.com/roulettemaster.installer.exe

Plug in a USB stick with at least 4GB of memory. The entire content will be erased during this process, so make sure you do not have any important data on the stick.

Run roulettemaster.installer.exe. If everything went is as it should, the installer will already show your USB stick under "Device". If not, please select the right one.

Select "MBR partition scheme for BIOS or UEFI computers"

Select "FAT32"

Make sure "Quick format" is checked.

Make sure "Create a bootable disk using" is checked and select "ISO image" from dropdown menu. Now click the "CDROM icon" to select the *.iso. Point to the downloaded "roulettemaster.iso".

Make sure "Create extended label and icon files" is checked.

Click "Start".

Comfirm any dialog that may pop-out and wait for the USB stick to be created(10min).

Prepare a PC board with at least 2GB RAM and at least one network card(I would suggest that you choose a intel D2500CC or HN) and a sata HDD with at least 30GB capacity and at least 7200RPM(high performance) or even better an SSD type HDD.

This PC will become "Roulette, Master PC". Plug in the USB stick and configure CMOS to boot from the USB stick.

It should load a live operating system from the USB stick.

When the desktop loads, an "Accept and continue"/"Abort" dialog pops out, select "Agree and continue"

now select "Install Roulette on Whole Hard Disk", OK

now select "/dev/sda" as target disk(this will create new partitions on target hdd),OK
Use complete disk...?, YES
WAIT
Successfully partitioned disk, press OK

finally comfirm "/dev/sda3" by pressing OK and wait for installation to complete, OK

Please wait..........

Reboot computer now?, YES

When desktop loads on a system running from HDD, start POPE with the desktop icon.

In POPE select "Utilities->Activate new roulette". Follow the widzard and configure everything as it should be. For activation password use the one that we provided to you. You can skip the step for ExpireCode if you do not have one ready. Apply for the code by sending an email to "enej.miklavcic@gmail.com". Pay attention when entering POPE passwords and make sure you do not loose it. You will need these passwords for connecting with POPE to this machine after the activation process is complete.

Now you can connect terminal computers(D2500HN with ram) via lan cable and ethernet hub to the installed server network card 0 - eth0.  Terminal computers have to be configured to "PXE boot from lan". 

Terminals get the OS from server and the first boot they will ask for station number(you press ENTER, NUMBER[1-9], ENTER and CTRL+ALT+DEL).

On second restart terminals will enter roulette software.